More on basing
Order of attack
I take a methodical approach to basing so I get everything done with no omissions. This is my order of attack:
- Glue figures to bases and let dry
- Make sure I have enough basing mixture – gloop – for the job in hand
- Have PVA glue and scenics ready
- Have tools ready
- Have some paint for touching up edges and any awkward bits
Tools for the task ahead
Over the years I tried different tools from dentist’s tools to carved wooden brush handles for applying textured gloop to bases. This experimentation led me to the conclusion that you need something pointed, flat, and capable of holding enough basing gloop for the job. While in an art shop buying a palette knife for a friend I had an epiphany.
Spreading gloop on bases is like spreading mortar. Therefore a palette knife shaped like a mason’s trowel should be the ideal tool, and it is indeed! I recommend trying one if you haven’t already. The other tool is a brush for brushing gloop into small gaps – and washing gloop off figures where I have spilt it!
Gloop or sand dip?
Putting a basic texture on a figure’s base can be done in two ways. One is to cover the base in PVA and dip in sand and then paint it. I prefer the alternative approach of using textured paint to cover and paint the base in one go.
I make my own textured paint for basing and have put the recipe on a separate page. There are commercial products you can buy but I enjoy the DIY approach – a bit like wargaming meets cooking.
If you wish to buy ready made ground texture I recommend Basetex. I used it for years and in terms of texture and sensible colours I have not found anything to beat it.
On with the show
Once the glue has dried and your figures are secure on their bases put on the gloop and paint any edges. Then leave to dry for some time – overnight usually does it.
Once everything is dry I give the textured surface a quick drybrush with a lighter colour. For standard green temperate bases I drybrush with a light yellow ochre artist’s acrylic.
Then I mix PVA glue and the paint I used as the base for the gloop 50:50. I then spodge this on clear areas with an old brush and while it is thick and wet press any scenics I am using into it. I use gaming and model railway scenics according to what looks ok and is on special offer!
Again let it all dry and blow (a photographer’s rocket blower is good but use it outside) or dust with a brush to get any flock or debris off the figures. Then give a final coat of spray varnish in a well ventilated area. This fixes the scenics in place and protects the base paint work too.
If you are using a spray matt varnish make sure you shake it well; it is not cold; use it on a dry day; don’t pick up a can of undercoat by mistake. This may sound neurotic but temperature and humidity can affect matt varnish.
Unintentionally spraying everything you just finished with undercoat is bad anytime!